Post by Aaron on May 11, 2011 8:52:04 GMT -5
87 s10 pick up, short bed regular cab. It is set up with a v8 in it, it has an auto trans and a locker in the rear. Truck runs very good and is very quick. I am looking at buying a street bike, and I don't need 3 vehicles so this one has to go. All specs are listed below.
The truck is sold AS IS!
$3400 obo
No joy rides!
will consider trades plus cash for 03+ ZX636, R6/1, GSXR600-750
I am located outside of Allentown PA.
'509 400 sbc
Bored .030"
Stock crank and rods
Speedpro 4 valve flat top pistons
New bearings, rings, gaskets
Double roller timing set
Comp xe274 cam (230/236 490/490 110)
Gm 336 heads
Z28 valve springs
Air gap intake
4qt stock oil pan
Professional products small balancer
Brand new tci sfi approved flexplate for 2pc rear seal external balance
1" open plastic carb spacer
Roughly 10k miles on engine.
The following has 1500 or less miles on them...
coated hedman shorty headers
Jegs 2.5" header back dual exhaust With pypes race pro muffler
Transdapt sbc swap mounts for 2.8l engine with new 2.8l frame stands
Brand new less than 500 miles on the following parts
C4 corvette radiator and cap
180* tstat
Electric automatic shut off for fans 180* off 190* off
Dodge intrepid electic fans (more than 500miles)
Tci sfi approved flexplate 168t
Custom built 9.5" torque converter by perfect shift in tannersville, pa, has anti ballooning plates, billet cover, extra bearings, welded fins, 3600-3800 stall but drives Better than a stock stall converter! (don't let the size of the stall fool you!)
Truck also has a th400 transmission
10 bolt with 373 gears and a powertrax locker
275/60 rear tires
225/60 front tires
2/3 drop with belltech 2" drop spindles and 3" blocks in rear
Interior is in great shape with blazer buckets, newer carpet, console. Has a 5" tach with shift light and oil pressure idiot light, b&m shifter with reverse lockout
Also have a front bumper, grill assembly for a sonoma, a box of misc. Parts and some traction bars to go with it!
here is the current idle video with pypes race pro mufflers..
www.youtube.com/watch?v=irZaR6dYsTc
here is with the old turbo muffler.. this one is more just for a walk around video than just a sound clip..
www.youtube.com/watch?v=aMThdgcB-yo
aaron
The truck is sold AS IS!
$3400 obo
No joy rides!
will consider trades plus cash for 03+ ZX636, R6/1, GSXR600-750
I am located outside of Allentown PA.
'509 400 sbc
Bored .030"
Stock crank and rods
Speedpro 4 valve flat top pistons
New bearings, rings, gaskets
Double roller timing set
Comp xe274 cam (230/236 490/490 110)
Gm 336 heads
Z28 valve springs
Air gap intake
4qt stock oil pan
Professional products small balancer
Brand new tci sfi approved flexplate for 2pc rear seal external balance
1" open plastic carb spacer
Roughly 10k miles on engine.
The following has 1500 or less miles on them...
coated hedman shorty headers
Jegs 2.5" header back dual exhaust With pypes race pro muffler
Transdapt sbc swap mounts for 2.8l engine with new 2.8l frame stands
Brand new less than 500 miles on the following parts
C4 corvette radiator and cap
180* tstat
Electric automatic shut off for fans 180* off 190* off
Dodge intrepid electic fans (more than 500miles)
Tci sfi approved flexplate 168t
Custom built 9.5" torque converter by perfect shift in tannersville, pa, has anti ballooning plates, billet cover, extra bearings, welded fins, 3600-3800 stall but drives Better than a stock stall converter! (don't let the size of the stall fool you!)
Truck also has a th400 transmission
10 bolt with 373 gears and a powertrax locker
275/60 rear tires
225/60 front tires
2/3 drop with belltech 2" drop spindles and 3" blocks in rear
Interior is in great shape with blazer buckets, newer carpet, console. Has a 5" tach with shift light and oil pressure idiot light, b&m shifter with reverse lockout
Also have a front bumper, grill assembly for a sonoma, a box of misc. Parts and some traction bars to go with it!
here is the current idle video with pypes race pro mufflers..
www.youtube.com/watch?v=irZaR6dYsTc
here is with the old turbo muffler.. this one is more just for a walk around video than just a sound clip..
www.youtube.com/watch?v=aMThdgcB-yo
aaron
