|
|
Post by ricks67 on Mar 9, 2008 6:06:02 GMT -5
I met up with Jim yesterday to pick up his dial indicator for indexing the bellhousing. turns out he had insomnia the other night and set up 3 different ways to install the indicator (with picture)so that the face was outward and readable without having to use a mirror to see it at different rotation points.
|
|
|
|
Post by chad on Mar 9, 2008 7:30:26 GMT -5
I would like to see his dial indicator. I tried to locate one from my local snap on dealer and he was unable to find one. If you have a part number or picture that would help. thanks
|
|
|
|
Post by ricks67 on Mar 9, 2008 11:01:08 GMT -5
jim didn't use the one from his friend. jim's had changable pins and was able to get his small enough to fit in the hole in the back of the bell. I'll try and get the part number from him. I'll aslo scan a pic he gave me on how to use his setup.
|
|
|
|
Post by chevellianrob on Mar 9, 2008 15:29:23 GMT -5
A test indicator would work well for this. Machinists and toolmakers use them extensivelly.  |
|
|
|
Post by ricks67 on Mar 22, 2008 5:55:06 GMT -5
CALLING DAVE!!!!!!!!!! We need you and your sawzall out at Dans for some surgery on Dans tremec  |
|
|
|
Post by Dave on Mar 22, 2008 11:34:51 GMT -5
I fell out of bed this morning at 5:56 I heard a calling for a need of a sawzall and jumped to my feet . I got the bolts rick,what else do you need . I always have plenty of blades  |
|
|
|
Post by bulkss on Mar 24, 2008 17:10:00 GMT -5
How did you guys make out today? I hope alll went well and we get to see a tire shredding video soon.
Mike
|
|
|
|
Post by Sean (PickSS) on Mar 24, 2008 19:41:57 GMT -5
Dan,
Did you get the POR 15 down yet?
|
|
|
|
Post by SpiderDan on Mar 24, 2008 20:51:25 GMT -5
Dan, Did you get the POR 15 down yet? Sean NO  But the trans is in  T H A N K S RICK & DAVE!!! Welcome back Sean. |
|
|
|
Post by Sean (PickSS) on Mar 25, 2008 17:50:37 GMT -5
Dan, Did you get the POR 15 down yet? Sean NO But the trans is in T H A N K S RICK & DAVE!!! Welcome back Sean. Did you sit in it and make noises like you were driving down the track while rowing the gears? ;D |
|
|
|
Post by Dave on Mar 25, 2008 18:54:15 GMT -5
Rick and I pulled away and he went back into the garage,I went around the block because I forgot to ask him something and when I walked up to the door he was shifting into(5th) It sounded like so I didnt want him to know I heard him and left. I know 1 thing he didnt have the radio on like someone else i know  |
|
|
|
Post by jchilders on Mar 25, 2008 19:52:58 GMT -5
Sean,
There is nothing wrong with sitting in you car making noises and pretending that you are driving it. I have been doing that for the last month and I have about another month before I can drive it again.
|
|
Aaron
Full Member
VTEC!!!
Posts: 168
|
Post by Aaron on Mar 25, 2008 22:43:01 GMT -5
good work guys.
i do that, but its hard to shift when your transmission is missing, but i still got the pedals, so its all good.
i will be cruising this summer i hope, as long as i can get some extra cash.
aaron
|
|
|
|
Post by ricks67 on Mar 26, 2008 5:11:00 GMT -5
|
|
|
|
Post by SpiderDan on Mar 26, 2008 19:44:36 GMT -5
Nice shots guys! I started the POR-15, what a messy job.  |
|
